Fix-A-Floor 300ml Tubes
One Tube provides coverage for approx 2 to 4 Sq Ft. The 300ml Tube is recommended for all Tile, Marble, Stone & Wood with narrow or no grout lines (wood/marble), and can be cut to fit any size grout lines.
Requires a standard caulking gun.
Fix-A-Floor is an extra strength repair adhesive customized for the specific use of re-bonding loose and hollow tile, marble, stone and wood flooring without removing or replacing. It’s fast, easy and affordable. DIY – just drill and fill.
Predrilled hole on tip allows for a small 1/8 in. drilled hole for narrow grout lines or wood
Additional cut lines on tip marked for 3/16 in. or 1/4 in. holes
Works great on small or large problem areas
Dries within 24 hours
Easy clean up with sponge and water, dries clear
Guaranteed for the life of your floor
Non-toxic, non-flammable and eco-friendly
Great DIY project, see How-To videos
Fix-A-Floor Repair Adhesive has a super ANSI tested bond strength of 130-135 psi
Designed to work with a standard caulk gun
Fix-A-Floor is extremely viscous: 1800-2700 mPa.s 25°C/77°F
Fix-A-Floor is very fluid: 1800-2700 mPa.s 25°C/77°F